Thursday, June 27, 2013
VAG Audi VW Seat Skoda Airbag Reseter
After car crash and airbag deployment, VW-Audi airbag sensor can by locked (Control unit faulty or deployed) and must be replaced. Even after small accident Airbag sensor will write in internal memory special error message “crash data stored” or “computer fault” and after you need o exchange very expensive sensor to new one. With our VAG Airbag Reset Tool you can reset and repair airbag computer in your office in 1 minute. No need to remove airbag sensor from the car.
How VW-Audi Airbag Reseter works:
Very simple user instruction: connect this tool to VW-Audi OBD II connector (for cars from year 1996-2002). RED button is for airbag “crash data” erase. Push this button once and wait: yellow light start to flash and after 15 second green light inform you that “crash data” is erased. Red light set ON if erasing is not successful. YELLOW button is for erase airbag “fault memory” or “errors”. If airbag warning lamp go OFF and immediately ON - evaluate airbag “error memory” using any VAG K-line scanner or VAS5051 or similar dealer equipment and repair according error code.
When we apply the +12V power supply to VAG airbag reseter ,the yellow light will flash 10 times,this indicates the system checking .After this we can do the normal operation. VAG Airbag Reset Tool has incorporated fully automatic airbag sensor type recognition. Opel Airbag Reset Tool works without additional computer and thought car OBD II connector can erase airbag sensor “crash data” or only fault memory.
Works with these cars: Older VW-Audi cars. In some cases use OBD to VAG old type converter (VAS-5051-2 not included in package). Sensors with white or orange 30-pin connector.
- AUDI A4, A6, A8 1994-1997: Airbag V BOSCH: 8A0 959 655 C (Bosch 0 285 001 038), 8A0 959 655 K (Bosch 0 285 001 155), 8A0 959 655 K (Bosch 0 285 001 151) - Crash data erase, Fault erase; - VW - Golf III, Passat B4, Sharan: 1J0 909 603 SIEMENS - Crash data erase, Fault erase;
